It's time for an upgrade.

Get connected to the future of inspection technology. 

Discover what advanced Non-Destructive Testing can do for you. 

Electromagnetic Acoustic Transducer (EMAT)

Screen pipes, tanks, vessels, heater tubes and other structures for flaw detection and corrosion/erosion

Alternating Current Field Measurement (ACFM) 

Detect surface cracks and pinpoint the location, length and depth of the defect

Phased Array Ultrasonic Testing (PAUT)

Identify off-angle cracks on multiple presentations simultaneously

Guided Wave Testing (GWT)

Asses metallic pipework, in difficult-to-access locations

Automated Ultrasonics Testing Technology

include TOFD, Pulse Echo, Corrosion Mapping and Phased Array

Computer Radiography Testing (CRT)

Produce digital images on reusable phosphorous plates with lower exposure requirements

Eddy Current Testing (ECT)

Detect flaws in conductive materials like heat exchanger tubes, condensers, boilers, tubing and aircraft surfaces 

Remote Field Current Testing (RFT) and RFT Array

are extremely sensitive to wall thickness variation with near equal sensitivity to inside and outside surfaces.

Near Field Testing (NFT) & NFT Array

inspects externally finned ferromagnetic tubing or tubing in heat exchangers that have Baffle Supports too close together for other electromagnetic techniques. 

Internal Rotating Inspection Service (IRIS)

is an Ultrasonic method for detecting corrosion and pitting. 

Pulsed Eddy Current (PEC) & PEC Array

inspect for corrosion under insulation (CUI). 

Laser Measurement Scanning For Fitness

facilitates an RBI or fitness for service assessment, as well as an assessment on surface corrosion, dent, or bulges where other NDE methods are not possible.

Magnetic Flux Leakage Inspection (MFL)

ideal to inspect large ferromagnetic steel surfaces such as storage tank floors.